ENG
INSTRUCTIONS
Charge the battery (with voltage converter)
Before using the amplifier for the first time, charge the battery for 12 continuous hours.
Insert the voltage converter into the corresponding input of the amplifier and connect it
to the electric current. The charging LED will turn red in the process; It will turn green
when the charge is complete.
Portable use
If using the amplifier in a portable manner, make sure that the internal battery is fully
charged; If it does not have enough charge, it will either go out or not.
Use with 12 V battery
1. Turn off the amplifier before beginning the procedure.
2. Connect the cables securely as shown in the following diagram:
8