Metabo PowerMaxx Li Manual Original página 13

17026896_0409 PowerMaxx_Li.book Seite 13 Mittwoch, 8. April 2009 4:37 16
10.2 Warning display (10) flashes
• Battery pack is defective. Remove the battery
pack immediately from the charger.
• Short circuit between the charging contacts.
Check the contacts for foreign bodies.
11 Tips and Tricks
For special tasks: thanks to the automatic spindle
stop, when the machine is switched off it can also
be used as a screwdriver.
When working with long screw bits or bit holders,
we recommend the use of the bit clamping bush
6.31281 (see Accessories chapter).
Drilling
Preferably in 2nd gear (high speed).
Screws
Preferably in 1st gear (low speed) and with torque
control.
Screws in areas that are hard to access
The angle screwdriver attachment (see Accesso-
ries chapter) makes work at difficult-to-access
areas particularly easy.
Thread tapping
Lubricate thread drills.
Select 1st gear (low speed).
Adjust torque control.
12 Accessories
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
See page 4.
A Quick-clamping chuck.
Fitting: unscrew protective cap (1).
(To remove a tight protective cap, insert a
metal pin (diameter 4 mm) in the protective
cap bore to assist removal). Screw the quick-
clamping chuck onto the spindle thread.
The quick-clamping chuck can be tightened
(and released again) with an open-jawed
spanner, a/f 17.
B Angle screwdriver attachment.
Fitting: mount on the aluminium neck of the
machine and tighten the clamping screw
with the enclosed Allen key.
C Battery pack
D Bit clamping bush
E Bit box
13 Repairs
Repairs to electrical tools and chargers
must be carried out by qualified
electricians only.
If the mains connection cable of this charger
is damaged, in order to prevent endangering
personnel and property it must be replaced by the
manufacturer, or the Customer Service of the
manufacturer, or a similarly qualified person.
Metabo machines requiring repairs can be sent to
the address specified on the spare-parts list.
Please enclose a description of the fault with the
power tool.
14 Environmental Protection
Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Battery packs must not be disposed of with regular
waste. Please return faulty or used battery packs to
your Metabo dealer.
Do not throw battery packs into water.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline
2002/96/EC on used electronic and electric
equipment and its implementation in national
legal systems, used power tools must be collected
separately and handed in for environmentally
compatible recycling.
15 Technical Specifications
Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
PowerMaxx Li:
U = Voltage of battery pack
n = No-load speed
Tightening torque for screwing:
M = soft screwing application (wood)
A
M = hard screwing application (metal)
B
M = adjustable torque (with torque control)
C
M = maximum tightening torque. When
D
used as a screwdriver.
ENGLISH
ENG
13