Craftsman professional 107.289850 Manual Del Operador página 31

Model # 107.289850
Overall Length 75"
Overall Width 54"
Deck Size (inches) 54"
Height of Cut (infinite) 1" to 4"
Transmission Type K71 - 2WD
Tire Pressure
Front 16x8.5-8 12-14 psi
Rear 24xl 0.5-12 10 psi
Turning Radius 18"
Engine Power (hp) 30
Engine Displacement (cc) 810 cc
Fuel Tank Capacity 4 gal.
Spark Plug Gap .030"
Weight 808 Ibs.
Engine Power Rating information: The gross power rating for individual gas engine models is labeled
in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque
Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE
J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600
RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given both the wide array of products on which engines are
placed and the variety of environmental issues applicable to operating the equipment, the gas engine
will not develop the rated gross power when used in a given piece of power equipment (actual "on-site"
or net power). This difference is due to a variety of factors including, but not limited to, accessories (air
cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating
conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and
capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
31