Publicidad
Idiomas disponibles
Idiomas disponibles
TOOL REQUIRED: PHILLIPS SCREWDRIVER
HEPA filter part
#
3-690320-001, is located on the side of cleaner.
NOTE: Unplug cleaner before changing filter.
NOTE: For best performance, replace filter yearly
Loosen screw:
the one (1)
Gently lower filter cover from
Grasp HEPA filter cartridge
To replace: Insert HEPA filter
screw at the top of filter cover.
body.
and remove. IMPORTANT: DO
into housing (gasket on inside)
NOTE: To prevent misplacing
screw, do not take screw com-
pletely out of filter cover.
L
Lift filter cover back into place.
Secure the one (1) screw at
the top of filter cover.
not clean with water.
and push into place.
For HEPA filter replace-
ments call 1-800-321 -11 34
(USA & Canada).
Publicidad
