Repeat Alarm (Snooze Function); Other Functions; Changing The Batteries - ADE WS 2301 Instrucciones De Operación

Estación meteorológica con sensor inalámbrico exterior
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 82

Repeat alarm (SNOOZE function)

− Press
The alarm signal stops according to the setting
made (default setting: 5 minutes). The correspond-
ing alarm symbol and
After the set time has elapsed, the device turns on
to wake you up again. This procedure can be re-
peated multiple times.
− To exit snooze mode, briefly press any button (except
) or press and hold
2 seconds.

Other functions

Illuminating the display
− Pressing
about 8 seconds.

Changing the batteries

The battery symbol indicates that the inserted
batteries should be replaced.
‚ When the battery symbol is displayed under
replace the batteries in the base station.
‚ When the battery symbol is displayed under the
number of the outdoor sensor, replace the batter-
ies in the outdoor sensor. Note the number of the
displayed channel (only when using several outdoor
sensors).
74
Weather station with wireless outdoor sensor WS 2301
once when the alarm signal sounds.
turns on the display backlight for
flash on the display.
for more than
,

Publicidad

Tabla de contenido
loading

Tabla de contenido