Melchioni Family TAZ Manual De Instrucciones página 19

 Select the most suitable blade for the required use and insert it in the feed channel
respecting the direction of the cone. Then insert the fixing adapter from the rear by
aligning the hexagon with the rear hole of the blade, then push it until it clicks.
 Align the unit thus obtained to the rotation shaft of the motor body, keeping the feed
channel rotated 45 degrees to the right (clockwise).
 Press lightly to insert the unit into the rotation shaft, then, still maintaining light
pressure, rotate the unit 45 degrees counter-clockwise until the channel is in a vertical
position, a position in which rotation stops spontaneously.
1 = Counter-clockwise rotation 45°
2 = Fixing adapter
3 = Insert
4 = Feed channel
5 = Blade
 Connect the electrical plug to a wall socket with a regular upstream earth leakage
circuit breaker.
 Ensure that the cord does not come into contact with hot parts and that it is not
subjected to excessive bending or kinking.
 Press the start button for a few seconds without inserting food to check the correct
assembly and correct rotation of the unit.
18