GreenWorks Pro SNC406 Manual Del Operador página 10

EN
8.3 START THE MACHINE
1. While holding the safety switch button (3), pull the bail
lever (2) to start the machine.
2. At the same time, the LED lights (8) can be turned on.
Keep bystanders a safe distance from the machine.
Examine the work area. Remove all stones, sticks, wire,
bones, and other debris that can ricochet because of the
rotating impeller.
8.4 STOP THE MACHINE
1. Release the bail lever (2) to stop the machine.
2. At the same time, the LED lights (8) can be turned off.
Wait until the impeller fully stops before you start the
machine again. Do not quickly turn the machine off and on.
WARNING
WARNING
WARNING
English
8.5 ADJUST THE DISCHARGE CHUTE
You can adjust the discharge chute 180° to change the snow
direction.
1. Push the chute-rotation handle (4) forward to move the
discharge chute (7) to the left.
2. Push the chute-rotation handle (4) rearward to move the
discharge chute (7) to the right.
8.6 ADJUST THE CHUTE DEFLECTOR
You can adjust the chute deflector up and down to change the
throwing distance of the snow.
10
7
4