MotionBlinds CM-08-E Guía De Configuración página 18

Pair a remote control
1
Any MotionBlinds remote can be connected to your blind.
Select a channel on the remote and press the program button on the motor to activate program mode.
.1
The blind will start stepping up and down.
Press the pair button on the back of the remote control to pair the blind with the selected channel.The
.2
blind will shortly stop stepping, indicating that the remote has been paired to the blind.
Shortly press the program button to deactivate program mode. The blind stops stepping and can be
.3
operated.
18
Check rotational direction
2
WARNING: risk of damage. Stop the blind before reaching the end positions.
Shortly press the down button to check if the blind unrolls the right way. If the blind moves up, the
.1
rotational direction must be changed.
Simultaneously press the up and down button to change the rotational direction.
.2
CM-11
CM-12
CM-13 CM-15
Pair
button
CM-17
Pair
button
Pair
button
Up
Down