Publicidad
Idiomas disponibles
Idiomas disponibles
ing use. In 6 programs you can also set various parameters for stimulation
yourself.
13. CLEANING AND STORAGE
Gel pads
• To ensure that the gel pads remain adhesive for as long as possible,
clean them carefully with a damp, lint-free cloth or clean the under-
side of the electrodes under lukewarm, running water and pat dry
with a lint-free cloth.
Before cleaning with water, remove the connection cable from
the device.
• Following treatment, stick the gel pads back onto the carrier foil of
the gel pads.
Cleaning the device
• After use, clean the device with a soft, slightly damp cloth. If it is very
dirty, you can also moisten the cloth with a mild soapy solution.
• Do not use any chemical or abrasive cleaning agents.
Ensure that no water enters the device.
Reusing the device
Once it has been properly prepared, the device can be used again. Prepa-
ration includes replacement of the gel pads as well as cleaning of the
surface of the device using a cloth moistened with a mild soapy solution
Storage
• Do not make sharp kinks in the connection cables and electrodes.
• Disconnect the connection cables from the electrodes.
• After use, stick the gel pads back onto the carrier foil of the gel pads.
• Store the device and accessories in a cool, well-ventilated space.
• Never place any heavy objects on the device.
• In order to achieve as long a battery service life as possible, fully
charge the battery at least every 6 months.
14. DISPOSAL
The empty, completely flat batteries should be disposed of through spe-
cially designated collection boxes, recycling points or electronics retailers.
You are legally required to dispose of devices including batteries.
Note: The codes below are printed on batteries containing
harmful
substances:
Pb
Cd = Battery contains cadmium, Hg = Battery contains mer-
cury.
For environmental reasons, do not dispose of the device in
the household waste at the end of its useful life. Dispose of the
device at a suitable local collection or recycling point in your
country. Dispose of the device in accordance with EC Directive
– WEEE (Waste Electrical and Electronic Equipment). If you
have any questions, please contact the local authorities responsible for
waste disposal.
15. PROBLEMS AND SOLUTIONS
The device does not switch on when the ON/OFF button
pressed. How to proceed?
(1) Make sure that the battery is fully charged.
(2) Charge the battery if necessary.
(3) Contact Customer Services.
The electrodes do not stick to the body. How to proceed?
(1) Clean the gel pads using a damp, lint-free cloth. The electrodes must
be replaced if they still do not stick securely.
(2) Clean the skin prior to any application; do not use skincare lotions or
oils prior to treatment. Shaving may increase the life of electrodes.
There is no noticeable stimulation. How to proceed?
(1) Press the ON/OFF button
connection cables are correctly connected to the electrodes. Ensure
that the electrodes are in firm contact with the treatment area.
(2) Ensure the connection plug is firmly connected to the device.
(3) Press the ON/OFF button
36
=
Battery
contains
lead,
to interrupt the program. Check that the
to restart the program.
is
Publicidad
