Publicidad
Idiomas disponibles
Idiomas disponibles
• Never pick up or carry a lawnmower while the engine is running.
• Reduce the brake setting during engine shut down and, if engine is provided with a shut-off
valve, turn the fuel off at the conclusion of mowing.Go slow when using a trailing seat.
4. PRE-OPERATION AND ASSEMBLY
Assembling the handle
1. Fasten the lower handle to the device by using
two bolts and two small knobs on each side .
2. Unfold the upper handle and fix it to lower
handle by using the big knobs and the bolts on
each side.
NOTE: Make sure the rope guide is on the right
handle, when you stand behind the mower.
Assembling the grass bag onto the mower.
Connection cord
Fix the connection cord to the handle with the cord
clip (supplied).
Assembling the grass bag onto the mower*
1. Lift the rear discharge cover with one hand and
hook in the grass bag.
2. Release the rear discharge cover to secure the
grass bag in position.
* Depending on model
Assembling the mulching plug*
1. Remove the grass bag.
2. Push the plastic mulching plug into the
discharge chute until it is locked in place.
3. Then release the flap, it will close back to cover
the mulching plug.
* Depending on model
English
Owner´s manual
31
Publicidad
