Publicidad
Idiomas disponibles
Idiomas disponibles
English
Owner´s manual
Empty the engine oil from the warm engine.
Remove the spark plug boot from the spark plug.
Clean the cooling fins of the cylinder and the housing.
Use the original packaging to ship whenever possible.
7. TROUBLESHOOTING
WARNING: Before performing any maintenance or cleaning work, switch off the engine
and wait until the blade has come to a stop.
Improper repairs can result in the product functioning unsafely. This endangers yourself and
your environment.
Faults which cannot be rectified with the aid of following table may be rectified by a specialist
company only (customer service center).
Please be aware that any improper repairs will also invalidate the warranty and additional costs
may be incurred.
Use only genuine spare parts. Only these spare parts are designed and suitable for the product.
The use of other spare parts not only voids the warranty, you can also endanger yourself and
your environment.
Machine vibrates
heavily
Engine does not start
Engine runs unsteadily
Uneven mowing results
Grass bag is not filled
sufficiently
40
Posible cause
Screws are loose
Blade fasteners are loose
Blade is unbalanced
Start/stop lever not pressed
Spark plug is defective
Does the cutting blade is worn
or damaged?
Fuel tank is empty
Engine may be flooded
Air filter is soiled
Spark plug is soiled
Blade is blunt
Cutting height is too low
Blade is worn
Grass bag is clogged
Cutting height is right?
The lawn/grass is wet ?
Does the discharge channel/
housing blocked ?
Does underside of the mower
deck have been clogged?
Remedy
Check screws
Check blade fasteners
Replace blade
Press start/stop lever
Replace spark plug
Replace it by the customer
service center
Refill with fuel
Remove plug and dry
Clean the air filter
Clean the spark plug
Sharpen the blade
Set correct height
Replace the blade
Empty the grass bag
Correct the cutting height
Allow the lawn to dry
Clean the discharge channel/
housing
Clean the underside of the
mower deck
Publicidad
