Publicidad
Idiomas disponibles
Idiomas disponibles
English
Owner´s manual
setting. Please see the following chart for detail setting:
To convert mower
For rear discharging
For rear bagging
For mulching
For side discharging
"√": installed "×" :removed
* Only for this models DLM 4601, DLM 5301P, DLM 5301, DLM 5301E, DLM 5303, DLM 5303E
5. OPERATION
WARNING: the blade begins to rotate as soon as the engine is started
NOTE: Do not operate the machine in enclosed or poorly ventilated areas as the exhaust gas
contains toxic substance. Keep hands, feet, hair and clothing away from all the moving parts of
the machine. The exhaust and other parts of the machine will become hot during use.
Make sure that the blade is securely fastened before starting the engine.
NOTE: To start the engine make sure that the spark plug boot is located on the plug and the
machine is filled with sufficient oil and petrol.
Start the engine
1. When starting a cold engine, press down the
Primerfully 3 times.
WARNING: Too much presses on primer May
cause engine flooded. When starting a warm
Engine, the primer does not need to be used. If the
engine stops due to a lack of petrol, refill and press
down the primer 3~5 times.
2. Stand behind the mower. Pull the engine Start/
stop lever toward upper handle. With one hand.
And place the other hand on the starter handle.
3. Pull the starter handle until you feel a resistance
and then start the engine with a sharp pull.
4. Once the engine is running, put the starter rope
Into the rope guide
34
Mulching plug
x
x
√
√
Grass bag*
Side discharge duct
x
√
x
x
1
x
x
x
√
Publicidad
