Publicidad
Idiomas disponibles
Idiomas disponibles
Warning Notices
on the Device
26
Do not use the functions described here until you have fully read and under-
stood the following documents:
-
These Operating Instructions
-
The accompanying document "Safety Rules"
-
All Operating Instructions for the system components, especially the safe-
ty rules
Welding is dangerous. To ensure that this device can be used correctly and
safely, the following basic requirements must be met:
-
Adequate welding qualifications
-
Appropriate protective equipment
-
Keep unauthorized people away from the welding torch and the welding
process
Dispose of old devices in accordance with safety rules and not in normal do-
mestic waste.
Striking voltage is present at the gas nozzle during the ignition process.
-
Do not touch the gas nozzle during the welding process!
-
Work on the gas nozzle should only be carried out when the power source
is switched off and disconnected from the grid.
-
Take safety precautions so that the welding system is not accessible to
third parties during the welding process.
The TTW 7200 ArcTig welding torch has
safety symbols and a rating plate fitted. The
rating plate and the safety symbols must
not be removed or painted over. The sym-
bols warn against operating the equipment
incorrectly, as this may result in serious in-
jury and damage to property.
* Rating plate
Publicidad
