Fronius TTG 220 P M Manual De Instrucciones página 29

Technical data
TTG 220 P M
DC welding current
at 10 min / 40 °C (104 °F)
AC welding current
at 10 min / 40 °C (104 °F)
Shielding gas
(Standard EN ISO 14175)
Electrode diameter
Welding torch length
Maximum permitted open circuit vol-
tage (U
Maximum permitted striking voltage
(U
ED = Duty cycle
TTW 400 M P
DC welding current at
10 min / 40 °C (104 °F)
AC welding current at
10 min / 40 °C (104 °F)
Shielding gas
(Standard EN ISO 14175)
Electrode diameter
Welding torch length
Lowest cooling capacity as per IEC
standard 60974-2 as function of ho-
sepack length
Minimum coolant flow Q
Minimum coolant pressure p
Maximum coolant pressure p
Maximum permitted open circuit vol-
tage (U
Maximum permitted striking voltage
(U
ED = Duty cycle
)
0
)
P
min
)
0
)
P
13 + 1.48 / 26 + 2.96 ft. + in.
13 + 1.48 / 26 + 2.96 ft. + in.
min
max
40% ED / 220 A
60% ED / 170 A
100% ED / 130 A
40% ED / 180 A
60% ED / 130 A
100% ED / 100 A
Argon
1.6 - 4.8 mm
0.063 - 0.189 in.
4.0 / 8.0 m
113 V
11 kV
60% ED / 400 A
100% ED / 300 A
60% ED / 350 A
100% ED / 270 A
Argon
1.6 - 4.8 mm
0.063 - 0.189 in.
4.0 / 8.0 m
950 / 950 W
1 l/min
0.26 gal (US) / min
3 bar
43 psi
5.5 bar
79 psi
113 V
11 kV
29