Original Prusa XL Manual Del Usuario página 30

PASO 22 Version B: Installing the Wi-Fi antena holder
Push the antenna cable through the opening in the cable cover (metal sheet) and
guide it behind the cover to the electronics box.
Attach the antenna-holder on the screws and push the cover to the left. Tighten the
screws.
Connect the antenna to the apporpiate slot on the XL Buddy board.
PASO 23 Version B: XL buddy box covering
30
3. Instalación de la impresora
Original Prusa XL Mono Cabezal (Ensamblada)
Be carefull, do not pinch any cables!
Put the XL-buddy-box-cover back
on the printer.
With a T10 key tighten the four
screws.