Publicidad
1.Lavado al encendido
de la máquina.
2. Lavado tras uso
acumulado.
3. Apertura del grifo.
4. Cierre del grifo.
FUNCTION
1. More than 3
hours of conti-
nuous operation.
2. Lack of pressure in
the inlet water
3. Water leakage
4. Filter lifespan
exhausted
46
Whenever the system is electrically connected, it will wash the RO membrane for
20 seconds.
When the machine accumulates more than 20 minutes of operation, the system
will wash the RO membrane 3 times for 3 seconds each, with a 2-second interval
between washes.
The system starts operating in normal mode.
The system stops producing water. If it does not accumulate more than 20 minutes
of operation, it performs a 5-second wash and goes into standby mode.
INDICATIONS
LED check blinking in red.
All lights blinking in white.
· 5 seconds of beeping.
LED flushing and check
blinking in white.
·5 seconds of beeping.
Machine filter LED solid red.
ACTIONS
Disconnect the machine from the power
source. Reconnect and hold down the power
button for 1.5 seconds.
Disconnect the machine from the power
source. Reconnect and hold down the power
button for 1.5 seconds.
Disconnect the equipment and dry the sen-
sor. Reconnect to clear the continuous alarm.
If the alarm persists, contact the Technical
Support Service (SAT).
To ensure the quality and characteristics
of the water dispensed by the equipment,
if maintenance is not performed three
months after the notice or scheduled date,
the equipment will stop operating for safety
reasons and cease dispensing water. Contact
technical support.
Publicidad
