Publicidad
Idiomas disponibles
Idiomas disponibles
_
WARNING
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated
(corded) power tool or battery-
operated (cordless) power tool.
WORK AREA SAFETY
•
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
•
Do not operate power tools in explosive
atmospheres,
such as in the presence
of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
•
Keep children
and bystanders
away while operating
a power tool. Distractions can cause you to lose
control.
ELECTRICALSAFETY
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
•
Avoid body contact
with earthed
or grounded
surfaces such as pipes, radiators,
ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
•
Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase
the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges, or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
•
When operating a power tool outdoors, use an
extension
cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
•
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
•
Use battery only with charger
listed. For use with
19.2V nickel-cadmium
and 19.2V lithium-ion battery
packs, see tool/appliance/battery
pack/charger
correlation supplement
988000-272.
PERSONAL
SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
•
Use personal
protective
equipment.
Always wear eye
protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
•
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
invites accidents.
•
Remove any adjusting
key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
•
Do not overreach.
Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or
jewellery.
Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
•
If devices are provided for the connection
of dust
extraction
and collection
facilities,
ensure these are
connected
and properly
used. Use of dust collection
can reduce dust-related hazards.
•
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
•
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER
TOOL USE AND CARE
•
Do not force the power tool. Use the correct
power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
•
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
•
Disconnect
the plug from the power source and/or
the battery pack from the power tool before making
any adjustments,
changing
accessories,
or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
3 - English
Publicidad
