Publicidad
Idiomas disponibles
Idiomas disponibles
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
3.4 Technical Specifications
HÜRNER Manual Hydr. 200
Power Specifications
Voltage
Frequency
Total Rated Powe
Heating Element
Facing Tool
Hydraulic & Control Unit
Hydraulic Specifications
Operating Pressure max.
.
Cylinder
Ambient Temperature Range
Hydraulic Oil
Operating Range
Dimensions
Basic Machine Chassis
Facing Tool
Heating Element
Hydraulic & Control Unit
Carrying and Storage Rack
Weights
Basic Machine Chassis
Facing Tool
Heating Element
Hydraulic & Control Unit
Carrying and Storage Rack
Transport Box
All Reducer Inserts
3.5 Overview of the Welding Process
The welder performs the welding process in the following manner:
• Applicable welding times and pressures are looked up in the
overview tables in the appendix.
• Pipes are clamped into the frame.
If pipes with an outside diameter smaller than the maximum
dimension of the machine are welded, select the reducer set
needed. The 8 individual inserts of the set that matches the out-
side diameter of the pipe to be welded have to be attached to
the clamps of the machine chassis using the provided bolts.
• Pipe butts are worked using the pipe facing tool.
• Pipe alignment is checked.
• The drag pressure, i.e. the minimum pressure to set the carriage
in motion and "drag" it along, is recorded at the machine.
• The pressures relevant to the welding operation are set.
• The heating element is inserted after cleaning it and checking its
temperature.
• The welding process proper is performed (see section 4), and the
operator waits for the jointed pipes to cool down.
• After the cooling time is over, pressure can be shutt off from the
pipes and the joint can be taken out of the chassis.
Version October 2020
230 V
50 / 60 Hz
3.45 kW
1.80 kW
1.05 kW
0.60 kW
160 bar
3.15 cm²
–5°C to +50°C
HF-E 15
63 through 200 mm
710 x 440 x 440 mm
550 x 400 x 400 mm
450 x 350 x 50 mm
480 x 310 x 300 mm
380 x 530 x 220 mm
39 kg
11 kg
6 kg
23 kg
8 kg
30 kg
41 kg
HÜRNER Manual Hydr. 200 User's Manual
9
EN
Publicidad
