Publicidad
Assemble & Detach Cupholder
see images
-
11
12
The completely assembled stroller is shown as
Stroller Operation
Adjust Backrest
see images
-
14
15
There are 4 recline angles for the backrest.
Recline Backrest
To recline the backrest, squeeze the recline handle on the
back of the seat, pull down on the backrest.
Raise Backrest
To raise the backrest, push up.
!
Make sure the recline is set properly for use.
Use Buckle
see images
-
16
17
Release Buckle
Press the center button to release the buckle.
Lock Buckle
Match the waist belt buckle with the shoulder buckle
and click into the center buckle.
the buckle is locked completely.
19
13
14
15
16
-
1,
17
- 2
A "click" sound means
17
- 3
17
!
To avoid serious injury from falling or sliding out, always
secure your child with harness.
!
Make sure your child is snugly secured. The space between
the child and the shoulder harness is about the thickness of
one hand.
!
Do not cross the shoulder belts. This will cause pressure on
a child's neck.
Use Shoulder & Waist Harnesses
see images
-
18
21
!
In order to protect your child from falling out, after your child
is placed into the seat, check whether the shoulder and
waist harnesses are at proper height and length.
- 1
Shoulder harness anchor A
18
- 2
Shoulder harness anchor B
18
- 3
Slide adjuster
18
For larger child, use shoulder harness anchor A and the
highest shoulder slots. For smaller child, use shoulder harness
anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the
anchor to be level with the side facing forward. Thread it
through the shoulder harness slot from back to front.
Rethread it through the slot that is closest to child's shoulder
height.
20
Use slide adjuster to change the harness length.
Press the button
-
2, while pulling the waist harness to
21
proper length.
- 3
21
19
- 1
21
20
Publicidad
