Publicidad
Idiomas disponibles
Idiomas disponibles
,
ATTACH
REAR
LIFT LINKS
(C) - Insert
rod end of link assembly
into hole in tractor
lift shaft suspension
arm (L) and pivot link
down to mower.
Lift rear corner
of mower
and position
slot in link assembly
over pin
on rear mower
bracket
(D) and secure
with washer
and retainer
spring.
9.
Repeat
on opposite
side of tractor.
IMPORTANT:
Check belt for proper routing
in all mower pulley grooves.
14. Install
belt onto engine
clutch
pulley
(M).
10.Turn
steering
wheel
to position
wheels
straight
forward.
11 .ATTACH FRONT LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly
through front hole in tractor
front suspension
bracket (F) and secure
with retainer spring (G) through hole in
link located behind the bracket.
12. Insert
other
end of link (E) into
hole in
front mower
bracket
(H) and secure
with
washer
and retainer
spring
(J).
13. Disengage belt tension rod (K) from lock-
ing bracket (L).
15. Engage
belt tension
rod (K) on locking
bracket
(L).
AOAUTION:
Belt tension
rod is spring
load-
ed. Have a tight grip on rod and engage slowly.
16. Raise attachment
lift to highest
position.
17. If necessary,
adjust gauge wheels
before
operating
mower as shown
in the Opera-
tion section
of this manual.
02937
10
Publicidad
