Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
TO AVOID
SERIOUS
INJURY,
BEFORE
PERFORMING
ANY
SERVICE
OR ADJUSTMENTS:
1.
Depress
brake
pedal fully and set parking
brake.
2.
Place
attachment
clutch
in "DISENGAGED"
position.
3.
Turn ignition
key to "STOP"
and remove
key.
4.
Make sure the blades
and all moving
parts have completely
stopped.
5.
Disconnect
spark
plug wire from spark
plug and place
wire where
it cannot
come
in contact
with plug.
TO
REMOVE
MOWER
1.
Place
attachment
clutch
in "DISEN-
GAGED"
position.
2.
Lower
attachment
lift to its lowest
posi-
tion.
3.
Disengage
belt tension
rod (K) from lock
bracket
(L).
_L, CAUTION:
Belt tension
rod is spring
load-
ed. Have atight grip on rod and release slowly.
4.
Remove
mower
belt from electric
clutch
pulley
(M).
5.
Disconnect
front
link
(E) from
mower
- remove
retainer
spring
and washer.
6.
Go to either side of mower and disconnect
mower
suspension
arm (A) from
chas-
sis and rear lift link (C) from rear mower
bracket
(D)- remove
retainer
springs
and
washers.
7.
Go to other side of mower and disconnect
the suspension
arm and rear lift link.
8.
From
right
side
of mower,
disconnect
anti-sway
bar (S) from
right rear mower
bracket
(D) - remove
retainer
spring
and
washer
and pull mower
toward
you until
the bar falls from
the hole in bracket.
9.
Turn tractor
steering
wheel
to the left as
far as it will go.
10. Slide mower
out from under right side of
tractor.
TO INSTALL
MOWER
Follow
procedure
described
in "INSTALL
MOWER
AND DRIVE
BELT" in the Assembly
section
of this manual.
02937
24
Publicidad
