Your new tractor
has been assembled
at the factory
with the exception
of those
parts left
unassembled
for shipping
purposes.
TOOLS REQUIRED
FOR
ASSEMBLY
A socket
wrench
set will make assembly
easier.
Standard
wrench
sizes
you need
are listed
below.
(1) 3/4" wrench
(1)
Pliers
(1) 9/16" wrench
(1) Utility
knife
(1) Tire
pressure
gauge
ADJUST
SEAT
1. Sit in seat.
2.
Lift up adjustment
lever (A) and slide seat
until
a comfortable
position
is reached
which
allows
you to press
clutch/brake
pedal all the way down.
3.
Release
lever to lock seat in position.
When
right or left hand is mentioned
in this
manual,
it means,
from
your
point
of view,
when you are in the operating
position
(seat-
ed behind
the steering
wheel).
TO REMOVE
TRACTOR
FROM
CARTON
UNPACK CARTON
1. Remove all accessible
loose parts and
parts cartons from carton.
2. Cut along dashed lines on all four panels
of carton. Remove end panels and lay
side panels flat.
3. Remove mower and packing materials.
4. Check for any additional
loose aprts or
cartons and remove.
CHECK BATTERY
1. Lift hood to raised position.
NOTE: If this battery is put into service after
month and year indicated on label (L) (label
is located between terminals) charge battery
for minimum of one hour at 6-10 amps. (See
"BATTERY"
in Maintenance
section of this
manual for charging instructions).
NOTE: You may now roll your tractor off the
skid. Follow the appropriate instruction below
to remove the tractor from the skid.
WARNING:
Before
starting,
read,
un-
derstand
and follow
all instructions
in the
Operation
section
of this manual.
Be sure
tractor
is in a well-ventilated
area.
Be sure
the area in front of tractor
is clear
of other
people
and objects.
TO ROLL
TRACTOR
OFF SKID
(See
Operation
section
for
location
and
function
of controls)
1. Raise attachment
lift to highest position.
2. Release
parking brake
by depressing
brake pedal.
3. Place freewheel control in "transmission
disengaged
position" (See "TO TRANS-
PORT" in the Operation
section of this
manual).
4. Roll tractor forward off skid.
Continue with the instructions
that follow.