Micro Sd Card; External Wireless Peripherals - JabloCom EYE-02 Instrucciones De Uso

5.3 Micro SD card

The EYE-02 camera is equipped with an SD micro memory card slot allowing further extension of the internal storage
ca-pacity. The EYE-02 camera comes with a 2GB memory card inserted. The length of video records that can be
stored on SD card depends on resolution and quality of picture and on video framerate.
Resolution
640 x 480 pixels
320 x 240 pixels
160 x 120 pixels
Saving pictures only when a motion is detected substantially extends the length of records. This function is active by
default and it can be deactivated in JabloTool.
JabloTool software application allows you to switch the EYE-02 camera to USB mode in which you can access the
SD card as a standard flash disc from an attached PC. To switch to USB mode, display the device state screen,
switch it to Advanced user mode, choose CONFIG and USB mode.
Other EYE-02 camera functions are blocked when the PC is directly accessing the SD card.
When exploring the SD card, you will find the following folder structure:
HISTORY
PICTURE
VIDEO
config.txt
The camera keeps free space on the memory card. It automatically deletes the oldest files.
The SD micro memory card also contains some data which is essential to the camera. Please
use JabloTool via USB when replacing the SD card to recover its data structures. Go to www.
jablocom.com for more information.

5.4 External Wireless Peripherals

The EYE-02 camera has a built-in short range radio transceiver, which allows communication with a wide range of
profes-sional security Wireless Peripherals from the OASiS system produced by JABLOTRON ALARMS
EN
(see www.jablotron.com).
Your camera can be extended to provide additional services such as:
ES
• Heating control by a mobile phone. Sirene sounding after alarm
• PANIC button function for elderly or disabled people.
• Operating your domestic appliances via remotely controlled mains socket.
DE
Refer to the table on the inside back cover page of this manual for a brief review of available types of Wireless Peri-
pherals.
FR Use JabloTool web interface on www.jablotool.com or JabloTool desktop software to enroll a new device. Up to 20
Wireless Peripherals can be enrolled into one camera.
• Remote controls / panic buttons: switch the camera to ENROLL mode, press any button on the remote control.
• Detectors: switch the camera to ENROLL mode, insert the battery into the detector.
NO
• JA-80L Siren: switch the camera to ENROLL mode, plug the siren into the wall socket.
• JA-80A Siren: switch the camera to ENROLL mode, connect the battery to the siren.
• AC-88 Wireless device as mains socket: switch the camera to ENROLL mode, insert the wireless socket into the
mains, activate its enroll regime and select Add new device in JabloTool (tab External devices).
FI
Once the camera is enrolled in the wireless device, you can choose the function of the relay outputs called Devi-
ceX and DeviceY. These can be managed remotely via JabloTool web interface on www.jablotool.com, by using
JabloTool desktop software or by SMS commands .
Example: When you select ON/OFF, you will be able to switch the device ON/OFF. When you select ALARM, the device will be
activated after ALARM event. When you select WATCH, the device will be active when camera is in WATCH mode.
EYE-02.ENG.MAN.User_Manual.23.C
Image quality
High
Middle
Low
This folder contains files with log of event history.
Archive of pictures in JPG format recorded after EVENTS.
Archive of video records in AVI format recorded after EVENTS.
A file with the current configuration of EYE-02 – can be used for backup or to restore the configuration.
Video framerate
2 per second
4 per second
4 per second
(For example: "p0065401.jpg")
(For example: "vid01021.avi")
- 16 -
Length of video on 2GB
SD card
4 hrs 34 min.
7 hrs 19 min.
21 hrs 42 min.