5.
Position the Shelf (ZF) at the bottom of the cart assembly. Using the provided hex wrench (T or ZH)
of your choice, affix with four 6x40mm Hex Bolts (P). See Figure 5.
6.
Using the pocket-drilled holes as guides, secure the shelf assembly to the stretchers (F) and axle (G)
with six 4x40mm Phillips Screws (O). Use a variable speed drill and a Phillips Driver Bit or a Phillips
Screwdriver. See Figure 6.
ZF
O
O
O
P
P
Fig. 5
O
Fig. 6
4303KFBA_Page 5_12/09
x 4
x 6