Bosch 0.601.016.600 Manual Original página 21

20 | English
Product Features
The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Button for selection of the reference level
2 Memory retrieve button "M="
3 Memory add button "M+"
4 Button for minimum and maximum measure-
ment (incl. continuous measurement)
5 Button for length, area and volume measure-
ment
6 Spirit level
7 Display
8 Alignment aid
9 Laser warning label
10 Measuring button
11 Button for indirect length measurement and
measurement of wall surfaces
12 Memory subtraction button "M–"
13 Button for continuous laser beam
14 On/Off and memory delete button
15 Positioning pin
16 Latch of the positioning pin
17 1/4" thread
18 Latch of battery lid
19 Battery lid
20 Serial number
21 Laser beam outlet
22 Reception lens
23 Tripod*
24 Laser viewing glasses*
25 Laser target plate*
26 Carrying strap
27 Protective pouch
* The accessories illustrated or described are not in-
cluded as standard delivery.
Display Elements
a Measured values stored
b Battery low indicator
c Temperature warning
2 609 140 692 | (14.12.09)
d Measured value/result
e Unit of measure
f Measurement reference level
g Laser switched on
h Individual measured value
(for length measurement: result)
i Measuring functions
Length measurement
Area/surface measurement
Volume measurement
Indirect length measurement
Wall surface measurement
Continuous measurement
MIN Minimum measurement
MAX Maximum measurement
Assembly
Inserting/Replacing the Battery
Using alkali-manganese or rechargeable batter-
ies is recommended for operation of the meas-
uring tool.
Less measurements are possible when using
1.2 V rechargeable batteries than with 1.5 V bat-
teries.
To open the battery lid 19, press the latch 18 in
the direction of the arrow and remove the bat-
tery lid. Insert the batteries/rechargeable bat-
teries. When inserting, pay attention to the cor-
rect polarity according to the representation on
the inside of the battery compartment.
When the battery symbol
time on the display, at least 100 measurements
are still possible. When the battery symbol flash-
es, the batteries/rechargeable batteries must be
replaced; measurements are no longer possible.
Always replace all batteries/rechargeable bat-
teries at the same time. Do not use different
brands or types of batteries/rechargeable bat-
teries together.
Remove the batteries/rechargeable batter-
ies from the measuring tool when not using
it for longer periods. When storing for longer
periods, the batteries/rechargeable batteries
can corrode and discharge themselves.
appears for the first
Bosch Power Tools