Publicidad
Idiomas disponibles
Idiomas disponibles
Before calling f orservice, determine the symptoms
and follow the suggested
solutions:
Washer does not operate:
®Checkif unit is plugged in_Theplug may have
come loose,
" Checkif the electricalwaJJreceptacleis of proper voltage.
®Checkif the circuit breaker needsto be resetor if the fuse needsto be replaced.
" Checkif the washer is overloaded. The load may need to be re-balancedand
clothing may need to be redistributed.
®Checkif the door is open. You may have to closethe door properly.
Thewasher pausesduring somecycles.This is normal during the "Synthetic"
cycle, which have short soak periods fon Youwill not hear thewasher operate for
a short period of time_When the soak time is over, it wiJJstart
automatically.
®Checkif the program/option selections are set properly. You may haveto adjust
the settings.
Checkif you have selectedthe "Delay Start" option. You may have to turn that
option OFF and reselect.
" Checkthe Power "ON/OFF' button to seeif it is in the OFF position. You may
have to pressthe button to set it in the ON position.
®Checkif the "Start/Pause" button is on "Pause"mode. Press this button to start the
wash process.
®Thewash processis paused. This is normak Theclothing sensoris checkingto
verify that there are clothesinside thewashtub. Water wiJJbe added
approximately 48 secondslaten
®Thepulsator pausesduring incoming water flow in thewash and rinsecycle. This
is normal. Thispreventssplashingduring the water inlet.
:23
Publicidad
