Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Assembly Instructions
174Wb
Bistro
Counterstool
177Wb
Hawthorne
Counterstool
Hawthorne
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
175Wb
Bistro
Barstool
178Wb
Barstool
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
F F a a x: x: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 2 2 0 0 6 6 0 •
0 • www
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
VN
We will replace any
www. . w w h h i i t t t t ie ier r w w oo
ood d . . c c om
om
Rev. 01/08
Publicidad
Manuales relacionados para Whittier Wood Furniture Bistro 174Wb
Resumen de contenidos para Whittier Wood Furniture Bistro 174Wb
- Página 1 Assembly Instructions 174Wb Bistro Service Policy: We will replace any Counterstool parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service 175Wb department directly (by phone, fax, mail or email) for replacement parts. Bistro Hours: Our friendly customer service staff Barstool...
- Página 2 174Wb & 175Wb & 177Wb & 178Wb — Parts List Before beginning assembly, check that the quantities of the parts received match those on the parts list below. Part W— Front Leg Assembly — Qty. 1 Part V— Back Leg Assembly — Qty. 1 J —...
- Página 3 174Wb Bistro Counterstool & 175Wb Bistro Barstool 177Wb Hawthorne Counterstool & 178Wb Hawthorne Barstool ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Head Screwdriver, Wood Glue, Rubber Mallet or Padded Hammer. IMPORTANT: READ GLUING HINTS BEFORE ASSEMBLING! Angled end of side stretcher. FIG. 1 1) Glue the Side Aprons (Ha) to the Back Leg Assembly (V).
- Página 4 Insert #8 x 1¼" Pan Head Screws (O) through pocket holes in side aprons (Ha) into Front and Back Leg Assemblies (W & V). Lay the Seat (J) face down on a clean protected surface, with the back of the seat hanging over the edge. Center the leg assembly on the seat and making sure that the seat remains in contact with the back legs, fasten in place with 2¾"...
- Página 5 Instrucciones para Armar 174Wb Taburete para Mostrador Bistro Normas para obtener servicio: Reemplaza- 175Wb remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Taburete para Wood Products directamente (por teléfono, fax, Bar Bistro correo o e-mail) para obtener piezas de repuesto.
- Página 6 174Wb, 175Wb, 177Wb y 178Wb Taburete para Mostrador Bistro; Taburete para Bar Bistro; Taburete para Mostrador Hawthorne; Taburete para Bar Hawthorne LISTA DE PIEZAS Antes de comenzar a armar el taburete, verifique que las cantidades de piezas que ha recibido corresponden a las de la lista de piezas más abajo. Cant.
- Página 7 Instructions de Montage 174Wb Tabouret de Comptoir Bistro Politique de service : Nous remplacerons toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- 175Wb tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou Tabouret de e-mail) pour obtenir les pièces de remplacement.
- Página 8 174Wb & 175Wb & 177Wb & 178Wb Tabouret de Comptoir Bistro; Tabouret de Bar Bistro; Tabouret de Comptior Hawthorne; Tabouret para Bar Hawthorne NOMENCLATURE DES PIÈCES Avant de commencer le montage, assurez-vous que les quantities de pièces reçuse correspondent à celles de la nomenclature des pièces figurant ci-dessous.
- Página 9 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers Rubber gloves to these questions may affect the type of finish you choose.
- Página 10 Gluing Hints (cont.) 3. We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Tite- bond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.