ADE Ines BA 2300-1 Instrucciones De Operación página 24

Performing Body Analysis
Performing Body Analysis
‚ Body analysis is only possible if you have entered your data , see the
previous chapter.
‚ Refer to the "Weighing Tips" section.
1. Step or press with some force on the weighing surface .
2. Briefly press the SET button .
3. Press the or
your personal body data.
4. Wait until the memory location number stops flashing.
5. Step barefoot onto the scale. Stand still and do not hold on to anything.
– Make sure that each foot is on a sensor.
– There must be no contact between the feet, legs, calves and thighs. Otherwise
the measurement will be inaccurate.
Shortly afterwards, the measured weight is displayed. Afterwards, the display will show
"o" and the body analysis will be performed.
Continue to stand still.
Afterwards, the measured values are shown repeatedly on the display:
Symbol/Display
kg / lb
1.
2.
3.
4.
5.
KCAL
6.
BMI
7.
The display also shows the difference between the entered and measured desired
weight.
If, for example , is displayed next to the desired weight, the measured weight is still
higher than the desired weight.
24
button to select the memory location where you have stored
Meaning
Your body weight in the set measurement unit
Your body fat content in %
Your body water in %
Your muscle mass in %
Your bone mass in %
Your basal metabolic rate in kcal per day
Your Body Mass Index
BA 2300-x body analysis scale