Dalbach KS88-F Instrucciones De Uso Y De Montaje página 30

Setting up and connecting
Tools required for changing door hinges:
Tool
Step-by-step instructions
1. Unscrew the upper hinge.
2. Lift off the appliance door carefully and put it aside.
3. Unscrew the lower hinge.
4. Insert the cover caps from left to right.
5. Remove the upper hinge, turn by 180° and screw it tight on
the bottom left-hand side.
6. Carefully fit the appliance door onto the pin of the lower
hinge and close the door.
7. Insert the pin of the lower hinge on the top left of the
appliance door and fix it to the appliance with both screws.
8. Align appliance door horizontally and vertically.
9. Make sure that the seal closes well.
10. Readjust the hinges if necessary.
Page | 30
Designation
Cross-head screwdriver
Flat screwdriver
Figure