Haier HD80-A3939E-S Manual Del Usuario página 74

6. REMOTE CONTROL (hOn)
This appliance is equipped with Wi-Fi
technology that allows you to control it
remotely via App.
APPLIANCE PAIRING (ON APP)
Download the hOn App on your device by

framing the following QR code:
or by the link:
go.haier-europe.com/download-app
The App is available for devices
running both Android and iOS, both
for tablets and for smartphones.
Get all the details
functions by browsing the App in
DEMO mode.
The frequency of the home Wi-Fi
network has to be set on the 2.4 GHz
band. You can not configure the
machine if your home network is set
to the 5 GHz band.
Open the App, create the user profile

(or log-in if it is already created previously)
and pairing the appliance following the
instructions on the device display.
TO ENABLE REMOTE CONTROL
Check that the router is switched on and

connected to the Internet.
Load the laundry and close the door.

Turn the programme selector to the

Remote position: the controls on the
control panel will be disabled.

TO DISABLE REMOTE CONTROL


of the Wi-Fi
74
Start the cycle using the app. When the
cycle has been completed, turn off the
machine by turning the programme
selector to the OFF position.
To exit REMOTE CONTROL mode while
a cycle is underway, turn the programme
selector to any position other than
Remote, without going through the
OFF. The control panel on the appliance
will be operative once again.
With the door closed, turn the programme
selector to the Remote position to control
the appliance using the app once again. If
there is a cycle underway, it will continue.
With the door opened, the REMOTE
CONTROL will be disabled. To enable
it again, close the door, turn the
programme selector to any position
other than Remote and then select it
again.