cosori CO108-NK-EUR Manual De Instrucciones página 7

USING YOUR KETTLE
(CONT.)
Adjusting Lid Tightness
If you feel the kettle lid fits too loosely or
is too hard to take off, you can adjust the
tightness of the lid.
1.
Take off the lid.
2.
Use a tool to adjust the 3 tabs on the
kettle lid. [Figure 4-5]
a. If you push the tabs in, the lid will
fit more loosely, and will be easier
to put on and take off.
b. If you pull the tabs out, the lid will
fit more tightly, and will not come
off as easily.
3. After adjusting the tabs, put the lid back
on and take it off again to see if the fit
is correct. If not, adjust the tabs again
until the lid fits the way you prefer.
Boil-Dry Protection
Your kettle is equipped with boil-dry
protection. If there is less than ½ cup /
118 mL of water in the kettle, the heat will
automatically shut off. Allow the kettle to
cool and add more water before using
again.
If all buttons blink and the kettle beeps, then
unplug the power cord to reset the kettle
before turning on again.
CARE AND
MAINTENANCE
Cleaning
1. Unplug the kettle and allow it to cool
before cleaning.
2.
Wipe the kettle and base with a soft,
damp cloth. Make sure that the electric
socket on the underside of the kettle is
kept dry.
3. Dry all parts after every use.
Note:
Never immerse kettle or power base in water.
Descaling the Kettle
You should descale the kettle at least once
a week if you use it frequently. Descaling
removes any mineral deposits that have
built up inside the kettle. Always descale
the kettle before and after storing for long
periods of time.
1.
Unplug the kettle and pour out all
water. Make sure the kettle is cool.
2.
Squeeze half a lemon into the kettle,
or add ½ US cup / 118 mL of distilled
vinegar into the kettle.
3. If the kettle has thick scale buildup,
scrub the kettle's inner walls with a
non-scratch scrub sponge.
Note:
Do not use steel wool, as this can
scratch the kettle.
4. Add 2 US cups / 473 mL of water. Boil
the mixture.
5.
Pour out the mixture, then wipe off any
remaining scale with a non-abrasive
cloth, sponge, or cleaning brush.
6. Repeat as needed.
Note:
For quick descaling, add 3 US tbsp /
44 mL of baking soda to ½ US cup / 118 mL
of vinegar into the kettle. Swirl the mixture
around until it coats the walls of the kettle,
wipe with a non-scratch sponge, and pour the
mixture out. This method will only work for a
thin layer of scale.
EN
7