Publicidad
Idiomas disponibles
Idiomas disponibles
Additional information on the temperature
•
The temperature inside the appliance is influenced by many factors. How you
set the temperature control dial depends on the ambient temperature, sun ex-
posure, how often you open the door and the amount of food stored. The middle
setting of the dial is most optimal in most cases.
•
Do not put food into the fridge freezer before it has reached its operating temper-
ature, which takes minimum 4 hours.
•
Do not change the temperature settings due to the change in the season of the
year. The ambient temperature increase will be detected by the sensor and the
compressor will be switched on automatically for a longer period of time in order
to maintain the temperature set inside the chambers.
•
The slight changes in temperature are perfectly normal and may occur, for in-
stance during the storage of great quantities of fresh products in the fridge, or
when the door is open for a longer period of time.This will not affect the condition
of the stored foodstuff, and the temperature will quickly return to its set value.
Error code
This appliance has 'fault display & alarm' function. Once the sensors got fault,
there are alarms displayed on the temperature displaying, the appliance still cools
but professional service engineer should be called and check the appliance.
F2 – Sensor of adapt zone
F3 – Sensor of fridge apartment
F4 – Sensor of freezer
compartment
F5 – Sensor of defrosting
2E – Fault of fan/motor in freezer
CE– Communication fault between main panel and display panel.
The above Errors only show on display, no voice
Over temperature alarm in freezer: after freezer temperature arrives at the set
temperature, after that, if the temperature rises to ＞-1 °C, the alarm will start,
accompany with flash of freezer temperature digit. Press any button to cancel
the voice alarm. The flash will remain until the temperature is ＜-1 °C.
PS: Main board locates in compressor compartment compartment
10
Publicidad
