Aprimatic BUONGIORNO Instrucciones Para La Instalación página 33

R
• With closed wings, position rail (1) on the lintel at the
heights given in the figure (12 mm between shutter
wing and rail). To this end, use the aluminium gauge
(2) supplied as template. Mark the points to drill for
the insertion of the expansion anchors.
• Drill the lintel (ø 8 mm). (To fix the elements use
expansion anchors ø 8 mm or similar devices provided
they ensure a safe and solid fixing).
• Fit insert (3) (11 cm) on the central guide of the rail to
fix the control unit supporting brackets. Fit inserts (4)
to fix the geared motors on the external guides.
• Fix the supporting rail to the lintel of the window
aperture using flathead screws 4.9x50 and wall
anchors ø 8mm
Caution
Check the rail is well secured to the lintel; a proper
fastening is fundamental for a correct functioning
of the automatic operator.
Single-wing
4
Double-wing
- 33 -
I n s t a l l a t i o n
A - Outside
B - Inside
1
A
B
2
12
8
Ø
3
3
Only for double-wing
4