Publicidad
Idiomas disponibles
Idiomas disponibles
Upper Compartment Floor
To remove and replace the upper compartment floor:
1, Remove all items from the compartment floor.
2, Remove the floor by raising the front and lifting it out.
3, Replace the floor by inserting the two rear tabs into the holee
in the rear of the lower compartment, Lower the floor onto the
liner of the lower compartment.
LOWERCOMPARTMENT
FEATURES
Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word "Accessory." Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please
call the toll-free number on the cover or in the "Assistance or
Service" section.
Shelves
The shelves in your freezer are adjustable to match your
individual storage needs.
Storing similar food items together in your freezer and adjusting
the shelves to fit different heights of items will make finding the
exact item you want easier. It will also reduce the amount of time
the freezer door is open, and save energy.
To remove and replace a shelf:.
1. Remove the shelf by tilting it up at the front and lifting it out of
the shelf supports.
2, Replace the shelf by guiding the rear shelf hooks into the
shelf supports, Tilt the front of the shelf up until rear shelf
hooks drop into the shelf supports. Check to make sure that
the shelf is securely in position.
Half-V dth wire Baskefs
There are two half-width wire baskets in your freezer.
To remove and replace a haft-width basket:
1. Remove all items from basket. Remove the basket by lifting
the front out of the slides, then lifting the basket out,
2, Replace the wire basket by loweringthe basket intothe slidee
then pushing the basket backwards until it is underthe shelf.
Full-width Wire Basket
To remove and replace full width wire basket:
1. Remove all items from basket. Remove the basket by lifting
the front out of the ball-bearing slides, then lifting the basket
out.
2. Replace the wire basket by first extending the ball-bearing
slides, then lowering the tabs on the sides of the wire basket
into the slides. Push the basket backwards until it is under the
shelf.
Ii
I
I
11
Publicidad
