RS Pro RS-5500 Manual De Instrucciones página 4

Digital Insulation Tester/English
DC Voltage
Range Resolution Accuracy
1000V 1V +(0.8%+3) 10MΩ
AC Voltage (40Hz~400Hz)
Range Resolution Accuracy
750V 1V +(1.2%+10)
Insulation Test
Range Resolution
Ω Ω
200M /250V 0.1M
200M Ω /500V 0.1M Ω
Ω
0~1000M /1000V
Ω
1000~2000M Ω 1M
/1000V
Range Test Current
200MΩ/250V 250KΩ(load)
200MΩ/500V 500KΩ(load)
0~1000MΩ
1mA
/1000V
1MΩ
1000~2000MΩ
/1000V
4
Input Overload
Impedance Protection
1000Vrms
Input Impedance Overload
Protection
10MΩ 750Vrms
Accuracy Terminal Voltage
250V+10%~-0%
+(3%+5) 500V+10%~-0%
+(5%+5) 1000V+10%~-0%
Short circuit current
1mA
≤
2. PARTS & CONTROLS
Digital Display
①
② Data Hold Button
③ Lock Button
Backlight Button
④
Test Button
⑤
Rotary Function switch
⑥
⑦ VΩ Jack
⑧ COM input jack
Pothook
⑨
Battery Cover
⑩
2-1 How to connect test leads.
a). On MΩ Range: Connect the red test lead into the "VΩ" terminal and
the black lead into the "COM" terminal.
b) On 200Ω and ACV Range: Connect the red test lead into the "VΩ"
terminal and the black lead into terminal "COM
2-2 Test leads check
Set the range select switch to the 200 range. With the tip and alligator
clip of the test leads connected. The indicator should read 00.0 . When
the leads are not connected the display will read infinity indicated by
"1". This will ensure that test leads are in working condition.
OTHER CONTROL INSTRUCTIONS ARE MISSING
2-3 Buttons
Hold Function
The hold function freezes the reading in the display. Press the HOLD key
momentarily to activate or to exit the hold function.
Digital Insulation Tester/English
5