Publicidad
Idiomas disponibles
Idiomas disponibles
5
1
WARNING
Remove or install the drive cover, carefully clip hand !
When the drive cover is removed, it is dangerous and does not allow operation of the truck.
1.3.3
How to add hydraulic oil
• It is necessary to add hydraulic oil when
you heard explosion sound from pipe
during lifting.
• Prepare the truck for maintenance and
repairs (See Maintenance Instructions).
• Remove the hydraulic cover，and take
out oil return pipe and connector(1);(See
chapter D Section1.3.2).
• Prepare a measuring tool, a diameter
of less than 8mm, about 100mm length
of the round rod, the round rod from
the filling port about 30~40mm, add
hydraulic oil until it hits the oil surface.
• Add hydraulic oil till you can't hear
explosion sound during lifting any more.
• Re-installation in the reverse order.
WARNING
Prohibit the amount of hydraulic oil cannot
overflow the refueling port.
The round rod should be clean and
resistant to corrosion.
REV. 09/2022
4
1
2
D
8
5
Fig1154-00013OM
Publicidad
