How To Use Your Steam Cleaner; Filling With Water; Turning The Machine On - Dupray ONE PLUS Manual De Instrucciones

en

HOW TO USE YOUR STEAM CLEANER

FILLING WITH WATER

Remove the water tank cap (2) and fill with up 2.44 L (or 0.64 gal) of water.
Use the provided funnel if needed.
IMPORTANT:
Never put anything else other than water in the boiler.
PLUGGING IN THE MACHINE
Unravel completely the electrical cord. Connect the electrical cord
to a 15 or 20 amp 110V / 120V power outlet (make sure the circuit
is not already used by another high wattage appliance).

TURNING THE MACHINE ON

Turn the main dial to the position. At this position the orange SteamReady™
indicator will come on when the unit reaches operating pressure, after
approximately 8 minutes of heating time.
During use, the orange SteamReady™ indicator will turn on and off.
This is normal, and indicates that steam is being generated in the boiler.
8