Refilling With Water - Dupray ONE PLUS Manual De Instrucciones

CONNECTING THE STEAM HOSE
Connect the steam hose by inserting the steam hose connector in the steam hose connection outlet and
press firmly. Make sure it cannot be pushed in any further and that the locking pin on the flap is in place.
IMPORTANT:
Make sure the locking pin on the flap is inserted in the hose connection.
ADJUSTING THE STEAM PRESSURE
Adjust the desired steam pressure using the steam pressure regulator wheel located on the hose handle,
from minimum (-) to maximum (+). Connect the accessory that you want to use to the steam hose.
To release steam, simply press the steam release trigger on the hose handle.

REFILLING WITH WATER

If the low water indicator comes on during usage and you would like to continue using the steam cleaner, you will need to follow these steps:
When the water level inside the tank is low, the machine will hum every
few seconds, then the red low water indicator will turn on and the low
water alarm will sound.
Refill the water tank with up to 2.44L (or 0.64 gal) of water and keep
steaming. Equipped with CST™, your steam cleaner can be refilled with
water at any time during operation.