Bissell PET HAIR ERASER Turbo 2475 Serie Guia Del Usuario página 10

Maintaining the Pre-Motor Filters
WARNING
To reduce the risk of electrical shock, turn power OFF and disconnect polarized plug from electrical
outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the
Dirt Tank.
1
Press the Dirt Tank Release Button
and pull away from vacuum.
3
Remove pre-motor filter from top of
Dirt Tank lid by pulling out.
NOTE: Replace filters every 3 to 6 months. Visit BISSELL.com for replacements.
10 BISSELL.com
2
Twist tank cover to the unlock position
then pull up on handle.
4
Both pre-motor felt and foam filters are
washable. Clean with mild detergent, rinse
and squeeze all excess water. Allow filters
to dry completely before reinserting. Return
Pre-Motor Filters to the top of the Dirt Tank,
and place the thick Foam Filter in last.