Bissell PET HAIR ERASER Turbo 2475 Serie Guia Del Usuario página 5

Assembly
1
Slide end of wand into top
of base. It will "click" when
inserted correctly.
4
Attach end of hose to
vacuum by sliding square
cuff into the bracket
below the Power Switch.
7
Secure lower hose to
hose clip.
2
Attach Stretch Hose by
lining the tabs on the cuff
with the notches on the
back of the vacuum. Twist
clockwise to lock hose
into place.
5
Place the Dirt Tank on the
vacuum by securing the
bottom in place first, then
pushing back until you
hear a "click".
8
Secure hose on Hose
Cuff. Make sure the hose
is sitting on the vacuum
without any twists.
3
Remove Dirt Tank. Press
the Dirt Tank Release
Button and pull away from
vacuum.
6
Insert the hose clip and
turn clockwise until you
hear a "click."
BISSELL.com 5