Maintaining the Post-Motor Filters
WARNING
To reduce the risk of electrical shock, turn power OFF and disconnect polarized plug from electrical
outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling
the tank.
1
Press the Dirt Tank Release Button and
pull tank away from vacuum.
3
Twist filter counter-clockwise to
unlock and remove from vacuum.
NOTE: Replace filters every 3 to 6 months. Visit BISSELL.com for filter replacements.
2
Pull tab up to access post-motor filter.
4
When reassembling, be sure to lock the
filter back into place. The pleated filter
may NOT be washed. If dust/debris
accumulates, gently tap the filter on the
inside of a trash container.
BISSELL.com 11