Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the Brush and Belt
1
Unplug and turn vacuum
over. Unscrew 10 Phillips-
head screws to remove
bottom cover.
4
1. Place belt back on Brush Roll.
2. Pinch belt around Brush Roll & hook
back around the motor gear.
NOTE: If an object becomes lodged in foot and brush shuts off, turn vacuum
OFF and unplug. Remove obstruction and brush will automatically reset when vacuum is
plugged in and turned back ON.
2
Pull Brush Roll straight
out and slide belt off
motor gear. Replace
Brush Roll and/or belt.
3. Rotate Brush Roll into place and line up
endcaps.
4. Reattach bottom cover with 10 screws.
3
Inspect Brush Roll by
placing it on its end and
spinning. The Brush
Roll should spin freely,
multiple times by one
flick. If it doesn't, replace
Brush Roll. Inspect belt
for damages and replace
if necessary.
BISSELL.com 13
Publicidad
