Publicidad
Idiomas disponibles
Idiomas disponibles
1.- PRESENTATION AND INTRODUCTION
1.1 GENERAL
The SUPRACODE machine was designed in accordance with current EC safety
regulations.
Personal safety for the people who operate this kind of machine is based on:
• A well-designed personal safety programme.
• The implementation of a maintenance programme.
• Following the recommended advice.
• Compliance with the safety rules contained in this manual.
Although this machine can be installed with relative ease, you should not
attempt to install, adjust or operate the machine without first reading this user
manual.
The machine leaves our factory ready for use with all the standard components
in the machine already calibrated, and calibration operations are only required
for those tools that are incorporated later or are not included as standard
items.
1.2 TRANSPORT AND PACKAGING
The machine comes inside a packaging container with the following
dimensions:
Width = 500mm; Length = 700mm; Height = 600mm.
TOTAL weight = 49 kg (machine weight = 44 kg + package weight = 5 kg)
After unpacking the machine, check it carefully for any damage that may
have occurred during transport. If you find something out of the ordinary,
immediately notify the carrier and do nothing with the machine until the
carrier's agent has performed the corresponding inspection.
NOTE: REMOVE THE HEAD PROTECTOR BEFORE
STARTING TO WORK WITH THE MACHINE
30
1.3 IDENTIFICATION LABEL
The SUPRACODE machine is provided with an identification label, which
specifies:
- The manufacturer's name and address
- The CE marking
- The year of manufacture
- The serial number
2.- MACHINE CHARACTERISTICS AND
INSTALLATION
2.1 MAIN PARTS OF THE MACHINE
Head protector
5
13
15
19
14
16
23
24
25
22
21
1
4
6
7
8
10
17
18
11
12
9
1. Tablet
2. Tablet stand
3. Tablet stand clamp knob
4. Rear protector
5. Accessories tray
6. Transparent protector
2
7. Head protector
8. Display
3
9. Swarf tray
10. Tool magazine
11. Clamp
12. X-Y Carriage
13. Cutter locking lever
14. Cutter
15. Tracer actuating knob
16. Tracer
17. Engraver lock
18. Engraver
19. Swarf suction kit
20
20. Vacuum pipe connection
21. Vacuum socket connection
22. Power supply socket + Switch
23. Type B USB connector
24. Type A USB connector
25. Ethernet connector
26. Emergency stop button
Publicidad
