Descargar Imprimir esta página

cecotec HYDROBOOST 3200 TOTALCLEAN Manual De Instrucciones página 14

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 62
- Never place your hands or fingers in the water jet while the
product is in operation.
- Do not attempt to block or redirect water leaks with any part
of the body.
- Always activate the lock system, even when stopping for a
moment.
- Risk of explosion. Never spray flammable liquids or use the
pressure washer in areas where combustible dust, liquid, or
vapours may be present. Do not use the machine in enclosed
buildings or near explosive atmospheres.
- Do not spray electrical and electronic appliances or cables.
- Do not remove the high-pressure hose from the machine
while the system is being pressurised. To depressurise the
device, turn it off, stop the water supply, and then press the
trigger 2 or 3 times.
- Do not activate the trigger lock system when the appliance
is in operation.
- Do not operate the appliance unless all parts are properly
connected to the main body (handle, trigger gun, nozzle,
etc.).
- Make sure to turn on the water supply before turning on
the pressure washer. Running the pump without water can
cause serious damage to the pump.
- Do not use the pressure washer if any parts are missing or
damaged. Check the condition of the product regularly and
repair or replace damaged or worn parts immediately.
- Use only the nozzle included with the product.
- Do not leave the high-pressure hose unattended while the
device is in operation.
- Hold the high-pressure hose and trigger gun firmly when
switching on and while using the machine.
- Do not leave the appliance running with the trigger released
14
HYDROBOOST 3200 TOTALCLEAN

Publicidad

loading

Este manual también es adecuado para:

08140