cecotec CONGA 999 ORIGIN GENESIS Manual De Instrucciones página 52

ENGLISH
Scrubbing mode. Fig. 7
- Remove the water tank.
- Lift the tank silicone lid and fill it with water.
- Refit the water tank.
- Attach the mop to the mop holder and the latter to the robot vacuum cleaner.
- Select the scrubbing level on the remote control or in the app. There are two scrubbing
levels: Low and High.
- Once the desired scrubbing level has been selected, the robot vacuum cleaner will enter All
in One mode to simultaneously vacuum, scrub, sweep, mop, and dry.
Note
- If you wish to mop, do not fill the water tank.
- If the tank is full, the robot vacuum cleaner will rotate on its own to moisten the mop as it
leaves the base.
- To ensure perfect mopping right from the start, it is recommended to evenly dampen the
mop before fixing it in place. It is also recommended to wash the mop after every use.
- It is recommended to be present when the robot vacuum cleaner is scrubbing.
- When the robot vacuum cleaner returns to the charging base, you must remove the mop.
Do not leave the robot vacuum cleaner charging with the mop assembled.
Back Home mode
Press the Back home button on the robot, vacuum cleaner, on the remote control, or on the app
(with a house icon) to send the robot to the charging base. The robot vacuum cleaner will stop
vacuuming until it reaches the base.
Manual mode
Select the manual cleaning option in the app or use the directional arrows on the remote
control to manually control your robot vacuum cleaner.
Power level function
Select the power level on the remote control or on the app to control the robot suction power
level during cleaning. There are 2 suction power levels: Eco and Normal.
Cleaning scheduling
To make cleaning easier, the robot vacuum cleaner has a function that allows it to be
programmed daily from the app. According to the setting, the robot vacuum cleaner will
automatically start cleaning in the selected days at the desired time.
52
CONGA 999 ORIGIN GENESIS