Haier HAMTSJ54MB1F Manual De Instrucciones página 24

6. Care and Cleaning
What?
Everyday soiling 1. Switch the power to the cooktop
on glass
(fingerprints,
2. Apply a cooktop cleaner while the
marks, stains left
by food or non-
3. Rinse and wipe dry with a clean
sugary spillovers
on the glass) 4. Switch the power to the cooktop
Remove these immediately with a
Boilovers, melts,
and fish slice, palette knife or razor blade
hot sugary spills scraper suitable for Induction glass
on cooktops, but beware of hot cooking
the glass
zone surfaces:
1. Switch the power to the cooktop
2. Hold the blade or utensil at a 30°
3. Clean the soiling or spill up with a
4. Follow steps 2 to 4 for 'Everyday
soiling on glass' above.
Spillovers on the 1. Switch the power to the cooktop
touch controls
2. Soak up the spill
3. Wipe the touch control area with a
4. Wipe the area completely dry
5. Switch the power to the cooktop
How?
off.
glass is still warm (but not hot!)
cloth or paper towel.
back on.
off at the wall.
angle and scrape the soiling or
spill to a cool area of the cooktop.
dish cloth or paper towel.
off.
clean damp sponge or cloth.
with a paper towel.
back on.
22
Important!
• When the power to the cooktop is
switched off, there will be no 'hot
surface' indication but the cooking
zone may still be hot! Take extreme
care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive cleaning
agents may scratch the glass. Always
read the label to check if your cleaner
or scourer is suitable.
• Never leave cleaning residue on the
cooktop: the glass may become
stained.
• Remove stains left by melts and
sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.
• The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you wipe
the touch control area dry before
turning the cooktop back on.