Publicidad
Idiomas disponibles
Idiomas disponibles
• The timer shows the rest operation time every minute and decreases by 1 hour, i.e., if the
timer is set at 12 hours, LED display shows 11 after 1 hour.
• There is a shortcut for timer setting. Long press the symbol TIMER
cel timer setting.
9. Disinfect: Symbol DISINFECT
symbol HEATING
start plasma function, display shows symbol PLASMA
well. Third touch to shut down heating function. Fourth touch to shut down plasma func-
tion.
• Long press symbol DISINFECT
10. Mist Output Speed: Touch
MIN to MAX to select desired mist output speed. Sliding from left to right, speed will
increase from 1 to 5, with display showing from 1 to 5 accordingly.
11. Auto Shut-Off: Once the water in the tank is not enough to keep the humidifier contin-
ue working, the humidifier will automatically stop working and will warn with 3 beeps
(no sound under NIGHT mode). Display will show water shortage symbol
water tank, humidifier will restart after 5 seconds. Otherwise, humidifier will automat-
ically power off after 5 minutes.
REMOTE CONTROL
When first using the remote control, the plastic tab should be removed from the battery
compartment.
1. On / Off
2. Speed
3. Humidity
4. Timer
5. Plasma
6. Auto
REPLACING THE REMOTE CONTROL BATTERY
1. Remove the battery compartment by
pinching the tab and pulling the compart-
ment out as below picture.
2. Remove the old battery.
3. Replace with a new battery. Make sure that
the polarities match.
4. Replace the battery compartment.
E NGL I SH
10
, first touch to start heating function, display shows
. Warm mist will come out after 10~15 minutes. Second touch to
to turn on/off water tank indicator light.
1
2
3
4
2 seconds to can-
, plasma generator works as
to enter manual mode, sliding from
only. Refill
5
6
Publicidad
