Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
WIRING A DOOR STRIKE LOCK (NORMALLY OPEN)
The door strike can be connected to Relay 1 or
Relay 2. See the Set Up section for information
about configuring Relays 1 and 2.
AC or DC Power
WIRING A MAGLOCK (NORMALLY CLOSED)
The maglock can be connected to Relay 1 or Relay 2. See the Set Up
section for information about configuring Relays 1 and 2.
INSTALLATION
Door Strike
NOTE: Do not use the unit's
power supply for the door strike.
NOTE: For AC power install a
Siemens S10K30 MOV
(Metal Oxide Varistor)
or equivalent.
NOTE: For DC power install a 1N4001
diode or equivalent.
AC or DC
Power
NOTE: For DC power
install a 1N4001 diode
or equivalent.
NOTE: Capacitor not needed for DC power install.
TEST
COM (Common)
NO (Normally Open)
Maglock
NOTE: Do not use the
unit's power supply for the
maglock.
10
SET UP
• Wire connectors can be
removed to simplify
wiring.
• DO NOT overload wire
connectors. Use
ONLY one wire per hole.
COM (Common)
NC (Normally Closed)
Publicidad
