Publicidad
Idiomas disponibles
Idiomas disponibles
Step 2B Solid Concrete Wall Option
WARNING:
Do not use a drill for tightening the lag screws! Only use a socket wrench.
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag
screws [A1]. Tighten the lag screws [A1] is pulled firmly against the wall plate.
●Ensure the wall plate is securely fastened to the wall before continu-
ing to the next step.
● Mount the wall plate directly onto the concrete surface without
any covering.
● The thickness of the concrete wall must exceed 5.5 in (140 mm).
2B-1
2B-2
01
Wall Thickness
≥5.5 in
(140mm)
Position the wall plate
template [04] at your desired
height. Level the wall plate tem-
plate [04] and mark the pilot hole
04
locations.
Drill 4 pilot holes using a 3/8
in (10mm) diameter drill bit.
Make sure the depth is not
less than 3 in (75mm).
11
Level
(Not Included)
3 in (75mm)
Electric Drill
3/8 in (10mm)
(Not Included)
Wall
Anchor
A2
Pencil
(Not Included)
Publicidad
