NAVEE V25i Pro Manual De Instrucciones página 5

2. Power on/off and light instructions
EN
1. Power on/off
Press the button to turn the scooter on, and hold the button
scooter is on, press twice to change riding modes.
2. Headlight & Taillight
When the scooter is on, press the button to turn on/off the headlight and taillight.
3. Steering light
When the scooter is on, press the left or right steering light button, then the corresponding steering light and the
indicator on the control panel will blink. Meanwhile, the buzzer will respond at the same frequency. Press the button
again to turn off the steering light.
4. Brake light
When riding, hold the brake lever and the brake light (taillight) lights up.
3. Care & Maintenance
Cleaning
Before cleaning the scooter, you must turn off the power, unplug the charging cables and close the charging cover
tightly.
Wipe the main chassis with a soft damp cloth, the hard-to-remove dirt can be scrubbed with a toothbrush.
Afterwards, wipe all areas with a dry cloth.
WARNING!
Do not wash the scooter with a high-pressure water spray.
·
Do not clean the scooter with corrosive cleaner, which will damage the external and internal structure of the
·
scooter.
Battery
Always charge before exhausting the battery to prolong the battery's lifespan.
When riding, storing or charging, do not exceed the specified temperature limit (refer to specifications). Failure to
follow instructions for use, storage or charging may result in battery damage, failure to charge and void warranty.
The fully charged scooter has an approximate standby time of 120-180 days. If it is not used for a long time, it should
be charged every 30 days. Please pay attention to the standby time to prevent irreversible damage to the battery
caused by not charging.
WARNING!
Do not use battery packs of other models or brands, as there may be a safety risk.
·
05
for 2 to 3 seconds to turn the scooter off. When the
Only use the original battery charger to avoid potential damage or fire.
·
If the battery is damaged or soaked with water, do not charge or continue to use it.
·
Do not remove the battery. Removing the battery is complicated, and improper operation may affect the operation
·
of the scooter.
Storage
If the scooter will not be used for an extended period, fully charge it, then turn it off and store it in a cool, dry place.
Make sure the scooter is turned off when being transported and kept in its original packaging if possible.
WARNING!
Please do not leave the scooter under hot sun or severely humid place for extended periods of time.
·
Please do not place the scooter near flammable materials.
·
This product contains a built-in lithium battery and must be transported only when permitted by local laws and
·
regulations.
Scooter Maintenance Schedule (Recommended):
Maintaining the scooter regularly can help keep the scooter neat and in good condition, avoid safety hazards,
minimize breakdowns, slow down the deterioration of the scooter, and extend the scooter's service life.
Service
Item Actions
Object
Inflate the tire until its
Tire Pressure pressure reaches
45-50 psi.
Tires
Tire Tread Check whether the tire is
cracked, deformed, worn,
Wear etc.
Tighten the screw that
connects the handlebar
assembly with the stem
assembly (with the
recommended torque of
4.8 ± 0.2 N·m).
Handlebar
Screws Assembly Tighten the accelerator
screw (with the
Screws
recommended torque of
1.6 ± 0.1 N·m).
Tighten the brake
lever screw (with the
recommended torque of
5 ± 0.2 N·m).
Every Every 3 Every 500 km/ Every 1000 km/ Every 10000 km/
month months 6 months 1 year 3 years
√ √ √ √
√ √ √
√ √ √ √
√ √
EN
06